www.strongtie.com



TJC37 Jack Truss Connector

TJC37 is a versatile connector for skewed members. Adjustable from 0 to 67.5 degrees (shipped with 67.5 degree bend). Screw hole locations allow for easy installation.

Material

Finish

Installation

  roll over images below to see larger image
 
TJC37 Top View Installation Typical TJC37 Installation
 
   

Load Table

Table

  1. Loads are based on attachment to a minimum 1.09mm steel thickness.
  2. Loads are for upward or downward direction.
  3. Load at 3.2mm deflection for serviceability is 3.6 kN.
Printed from
© 2014 Simpson Strong-Tie®