www.strongtie.com



S/H, H & ULT Seismic & Hurricane Ties

Designed to provide seismic and wind ties for trusses or joists, this versatile line may be used for general tie purposes, strongback attachments, and as all-purpose ties where one member crosses another.

Material

Finish

Installation

  roll over images below to see larger image
 
S/H1 H2A S/H2.5 S/H3
H6 1. Typical S/H1 Installation 2. Typical H2A
Installation
3.Typical S/H2.5 Installation
 
4. Typical S/H3 Installation 5. H6 Stud-to-
Band-Joist
Installation
6. H6 Studto- Top-Plate Installation
ULT-L (Left) ULT-R (Right) ULT-L (Left)
Installation
ULT-R (Right)
Installation

Load Table

Table

  1. Loads are based on attachment to a minimum 0.75mm steel thickness.
  2. Hurricane ties are shown installed on the outside of wall for clarity. Installation inside of wall is acceptable. For Continuous Load Path, connections in the same area must be on same side of wall.
  3. Lateral Loads are limited to 3.2mm deflection for serviceability.
  4. ULT with CFS members having a minimum thickness of 0.95mm the LRFD uplift load is 4.75kN.
Printed from
© 2014 Simpson Strong-Tie®