www.strongtie.com



STC/DTC Roof Truss Clips

For alignment control between a roof truss and nonbearing walls; the 38mm slot permits vertical truss chord movement when loads are applied.

Material

Finish

Installation

  roll over images below to see larger image
 
DTC STC Typical STC Installation
 
   

Load Table

Table

  1. Loads are based on attachment to a minimum 0.75mm steel thickness.
  2. Truss or rafter must be bearing on top plate to achieve the allowable loads under "WITHOUT GAP."
  3. Load at 3.2mm deflection for serviceabitity is 0.8 kN.
Printed from
© 2014 Simpson Strong-Tie®