www.strongtie.com



MTSM/HTSM Twist Straps

The MTSM and HTSM offer high strength truss to masonry connections.

Material

Finish

Installation

  roll over images below to see larger image
 
MTSM16 MTSM20 HTSM16 HTSM20
Titen®
Hex Head Screw
Typical MTSM20 Installation    

Load Table

Table

  1. All straps have additional fastener holes.
  2. Twist straps do not have to be wrapped over the truss to achieve the tabulated loads.
  3. Minimum edge distance in concrete block for Titen screw is 38mm.
  4. May be installed on the inside face of the wall.
  5. Min. f'm = 10 MPa and f'c = 17 MPa.
  6. Loads are based on attachment to a minimum 0.75mm steel thickness.
Printed from
© 2014 Simpson Strong-Tie®