www.strongtie.com



L&S/LS Reinforcing & Skewable Angles

L and S/LS angles are load rated and provide the correct thickness and number of fasteners the specifier is looking for compared with field fabricated clip angles.

General utility reinforcing angles with multiple uses. S/LS—Field-adjustable angles attach members intersecting at angles.

Material

Finish

Installation

  roll over images below to see larger image
 
S/LS Top View Typical S/LS50
Installation
S/LS50 L30
 
  Typical L30 Installation

Load Table

Table

  1. Loads are for one part only.
  2. F2 direction loads at 3.2mm deflection for servicebility are 0.3 kN and 0.4 kN for 0.75mm and 0.95mm CFS respectively.
Printed from
© 2014 Simpson Strong-Tie®