www.strongtie.com



LTP5 Framing Anchor

The LTP5 framing anchor spans subfloor at the top of the blocking or rim joist. The embossments enhance performance and allow for design flexibility.

Material

Finish

Installation

Note: When attaching an LTP5 framing anchor over sheathing, the screws must penetrate and engage the steel framing. A minimum of 3 threads shall penetrate past the steel.

  roll over images below to see larger image
 
LTP5 1. 2. 3.
   
   

Load Table

Table

  1. Loads are for one part only.
  2. Loads are based on attachment to a minimum 0.95mm steel (stud & sheathing) thickness.
  3. Load for Type 3 connection assumes Cd = 1.60 per National Design Standard (NDS).
Printed from
© 2014 Simpson Strong-Tie®